Back to all problems
Common Water Issue in BC
Low Water Pressure Throughout the Building
A noticeable drop in water pressure at all fixtures suggests a system-wide issue rather than a local fixture problem. In BC homes, low pressure can indicate a leak, a supply restriction, or municipal supply issues. Differentiating between these causes is important for deciding on the correct repair approach.
Possible Causes
- •Underground service line leak reducing available flow to the building
- •Partially closed or failing main shut-off valve
- •Pressure regulator failure (common in areas with variable municipal pressure)
- •Mineral or sediment buildup in pipes reducing diameter over time
- •Municipal water main issue or seasonal demand variation
Recommended Steps
- 1Check if the issue affects both hot and cold water (if only hot, the water heater is likely the cause)
- 2Check your pressure regulator if you have one — verify the pressure setting
- 3Inspect your main shut-off valve to ensure it is fully open
- 4Schedule a pressure test and flow test to determine if the issue is a leak or a restriction
Need Professional Help?
Don't let a small leak become a big problem. Contact LeakInspections.ca — a division of Anyleak.ca and Leak.ca — for expert diagnosis.